NEWS RELEASE: Clippard Announces Release of E2S Series 10 mm Media Isolation Valves
Clippard’s E2S series 10 mm media isolation valves [Image courtesy of Clippard]
With a durable, glass-filled nylon body and an EPDM diaphragm that separates the actuation mechanism from the flow path, the E2S series is an excellent choice for dispensing a wide range of aggressive gases and liquids in applications that require compact, electronically-controlled valves which have minimal backpressure.
Applications include printing equipment, medical diagnostic devices, dental equipment, fermentation, water treatment, dispensing, and more.
- Compact, 10 mm glass-filled nylon body
- EPDM diaphragm membrane
- Large inventory, ready to ship
Clippard E2S Series 10 mm media isolation valves specifications:
- Connection: 11.8” (30 cm) wire leads
- Flow Range: 15 to 30 l/min
- Function: 2-way normally-closed isolation (monodirectional) — Always less than 2 psig (0.1 bar) backpressure on outlet port for proper function.
- Material, Body: Nylon
- Material, Seals: EPDM
- Material, Wetted: Glass-filled nylon, EPDM
- Max. Flow: 30 l/min
- Max. Temperature of Coil: 311˚F (155˚C)
- Medium: Air, water, gas, or compatible fluids
- Mount: M2x14
- Operating Temp. Range: 14 to 122˚F (-10 to 50˚C), must use clean, dry air when <32˚F (0˚C)
- Operating Pressure: 0 to 36 psig (2.5 bar) — Always less than 2 psig (0.1 bar) backpressure on outlet port for proper function.
- Response Time: 6 ms
- Voltage: 12 to 24 VDC
- Wattage: 1.3 to 2.8 watts
For more information about these valves or any of Clippard’s 7,000 other precision fluid control products, call 513-521-4261 or visit www.clippard.com.
The opinions expressed in this news release are the author’s only and do not necessarily reflect those of Medical Design & Outsourcing or its employees.
